File:Hall effect.png
原始文件 (984 × 986像素,文件大小:401 KB,MIME类型:image/png)
|
描述Hall effect.png |
English: Shows the Hall effect for different directions of electric current and magnetic field. Legend:
In drawing "A", the Hall element takes on a negative charge at the top edge (symbolised by the blue color) and positive at the lower edge (red color). In "B" and "C", either the electric current or the magnetic field is reversed, causing the polarization to reverse. Reversing both current and magnetic field (drawing "D") causes the Hall element to again assume a negative charge at the upper edge. Deutsch: Diese Grafik illustriert den Halleffekt unter verschiedenen Richtungen des Elektronenflusses/des Magnetfeldes. Legende:
In Abbildung A wird im oberen Bereich ein Elektronenüberschuss (durch die blaue Farbe symbolisiert), im unteren Bereich ein Elektronenmangel (rote Farbe) erzeugt. In den Abbildungen B und C ist der Elektronenfluss bzw. der Magnet in eine andere Richtung gebracht worden, weshalb die Polarisierung des Hallelementes umgekehrt ist. Wird sowohl der Elektronenfluss als auch das magnetische Feld umgekehrt (Abbildung D), entsteht wie in Abbildung A ein Elektronenmangel im unteren Bereich.Français : Effet Hall pour différents sens du courant et du champ magnétique.
For more translations SEE BELOWLégende:
Dans le dessin A, une charge négative apparait à la bordure haute de l'élément (couleur bleue), et une charge positive à sa bordure basse (couleur rouge). En B et C, l'inversion du sens du courant ou de celui du champs magnétique provoque l'inversion de cette polarisation. En D, la double inversion du courant électrique et du champs magnétique donnent à l'élément la même polarisation qu'en A. |
||||||||
日期 | |||||||||
来源 | 自己的作品 | ||||||||
作者 | Peo | ||||||||
授权 (二次使用本文件) |
我,本作品著作权人,特此采用以下许可协议发表本作品:
您可以选择您需要的许可协议。 |
||||||||
其他版本 | only shows case A |
Awards
This image was selected as picture of the day on Wikimedia Commons for 19 October 2005. It was captioned as follows: English: Hall effect Other languages:
Aragonés: Efeuto Hall Čeština: Hallův jev Deutsch: Illustration des Hall-Effekts Eesti: Hall'i effekti illustratsioon English: Hall effect Español: Ilustración del efecto Hall Français : L'effet Hall illustré Gaeilge: Iarmhairt Hall Galego: Efeto Hall. Latina: Hall effectus. Nederlands: Illustratie nl:Hall-effect Polski: Efekt Halla Português: Diagrama do efeito Hall Slovenščina: Hallov pojav Suomi: Hallin efekti Русский: Эффект Холла ไทย: ปรากฏการณ์ฮอลล์ 日本語: ホール効果 中文: 哈尔效应示意图 |
Deutsch: Dieses Bild wurde als Bild der Woche auf der tschechischen Wikipedia für die 1. Woche 2007 ausgewählt. English: This image was selected as a picture of the week on the Czech Wikipedia for 1st week, 2007. Français : Cette image est sélectionnée en tant qu’image de la semaine sur la Wikipédia Tchèque pour la 1e semaine de 2007. Italiano: Questa immagine è stata selezionata come Immagine della settimana su Wikipedia in ceco per la I settimana del 2007. Македонски: Сликава е избрана за слика на неделата на чешката Википедија за I недела од 2007 година. Русский: Эта иллюстрация была выбрана изображением недели в чешском разделе «Википедии» для недели номер 1 2007 года. Українська: Ця ілюстрація була вибрана зображенням тижня в чеському розділі «Вікіпедії» для тижня номер 1, 2007 року. |
Rendered using POV-Ray (see http://www.povray.org). The scene description "code" shown below supports rendering all of the four "situations" portrayed in the image - see the comment given in the code. The four images were subsequently combined, and the numbers and letters added, in a graphics software package. POV-Ray "code" for rendering all four parts of the illustration:
/*
====================================================
The Hall effect in metal under various circumstances
----------------------------------------------------
Created by Søren Peo Pedersen - see my user page at
http://da.wikipedia.org/wiki/Bruger:Peo
====================================================
*/
#declare NorthAtLeft=no; // Orientation of magnetic field:
// Use "yes" for north pole to the left, and south pole to the right
// Use "no" for north pole to the right, and south pole to the left
#declare PlusTowardsViewer=yes; // Direction of current:
// Use "yes" to have the positive pole at the ends of battery and Hall sensor nearest to viewer
// Use "no" to have the negative pole at the ends of battery and Hall sensor nearest to viewer
#declare PositiveCharge=no; // Polarity (color) of charge carriers in the circuit:
// Use "yes" for orangeish colored charge carriers in wires and Hall sensor
// Use "no" for light blue colored charge carriers in wires and Hall sensor
#declare HallUpwards=yes; // Direction of sideways force upon charge carriers:
// Use "yes" to have the charge carriers "bend upwards" inside Hall element
// Use "no" to have the charge carriers "bend downwards" inside Hall element
#declare NegativeEdgeUp=yes; // Electrical polarization of Hall element (indicated by color):
// Use "yes" to have bluish color at top of Hall element, indicating negative charge here
// Use "no" to have reddish color at top of Hall element, indicating positive charge here
#declare MagnetFont="arialbd.ttf" // Font for the "N" and "S" nomenclature on magnets
// -----------------------------------------------------------------------------------------
#declare txtNeutralElement=texture { // Texture for electrically neutral parts of Hall element
pigment {color rgbft <.5,.5,.5,1,0>}
finish {
reflection rgb .5
phong 1
metallic
}
}
#declare txtNegativeElement=texture { // Texture for negatively charged parts of Hall element
pigment {color rgbft <.1,.3,.9,1,0>}
finish {
reflection rgb <.1,.3,.9>
phong 1
metallic
}
}
#declare txtPositiveElement=texture { // Texture for positively charged parts of Hall element
pigment {color rgbft <.9,.3,.1,1,0>}
finish {
reflection rgb <.9,.3,.1>
phong 1
metallic
}
}
#declare txtPolarisedElement=texture { // Texture for polarized parts of the Hall element
gradient y
texture_map {
[0 txtNegativeElement]
[.5 txtNeutralElement]
[1 txtPositiveElement]
}
translate <0,-.5,0>
#if (NegativeEdgeUp)
rotate <180,0,0>
#end
}
#declare txtHallElement=texture { // Complete texture for the entire Hall element
gradient z
texture_map {
[0 txtNeutralElement]
[.5 txtPolarisedElement]
[1 txtNeutralElement]
}
translate <0,0,-.5>
scale 4
}
#declare WireTxt=texture { // Texture for the wires connecting Hall element with power source
pigment {color rgb .5}
finish {
reflection rgb .7
phong 3
metallic
}
}
#declare Qtorus=intersection{ // 1/4 of a torus, for rounded "corner" on the wiring
torus {1,.06 rotate <0,0,90>}
box {-2,<2,0,0>}
}
#declare PlusPgmt=pigment { // Pigment for positive end of the battery (power source)
object {
merge {
box {<-.3,0, .35>,<.3,1,.45>}
box {<-.05,0, .1>,<.05,1,.7>}
}
pigment {color rgb <1,0,0>}
pigment {color rgb 1}
}
}
#declare MinusPgmt=pigment { // Pigment for negative end of the battery (power source)
object {
box {<-.3,0,-.55>,<.3,1,-.45>}
pigment {color rgb <0,0,1>}
pigment {color rgb 1}
}
}
#declare PowerSource=union { // Power source, symbolised by a battery
merge {
torus {.45,.05 rotate <90,0,0> translate <0,0,-.95>}
cylinder {<0,0,-.95>,<0,0,.8>,.5}
torus {.45,.05 rotate <90,0,0> translate <0,0, .8>}
pigment {
object {
plane {<0,0,1>,0}
pigment {PlusPgmt}
pigment {MinusPgmt}
}
rotate <0,0,-35>
}
finish {ambient .4}
}
merge {
torus {.35,.05 rotate <90,0,0> translate <0,0,-.95>}
cylinder {<0,0,-1>,<0,0,-.9>,.35}
torus {.35,.05 rotate <90,0,0> translate <0,0,.8>}
cylinder {<0,0,.85>,<0,0,.8>,.35}
difference {
cylinder {<0,0,.85>,<0,0,.9>,.15}
torus {.15,.05 rotate <90,0,0> translate <0,0,.9>}
}
cylinder {<0,0,.9>,<0,0,.95>,.1}
torus {.05,.05 rotate <90,0,0> translate <0,0,.95>}
cylinder {<0,0,.95>,<0,0,1>,.05}
pigment {color rgb .5}
finish {reflection rgb .9 phong 1 metallic}
}
}
#macro txtChargeCarrier(Transparency) // Texture for charge carriers and their "motion blur tails"
pigment {color rgbt <
#if (PositiveCharge)
1,.5,.2,Transparency
#else
.2,.5,1,Transparency
#end
>}
finish {ambient .4}
#end
#declare FieldArrow=merge { // Arrow indicating direction of magnetic field
cylinder {<-2.5,0,0>,<2.3,0,0>,.003}
cone {<2.3,0,0>,.05,<2.5,0,0>,0}
pigment {color rgb 0}
#if (NorthAtLeft)
#else
scale <-1,1,1>
#end
no_shadow
no_reflection
}
#declare StraightCharge=union { // Charge carrier with straight "motion blur tail"
sphere {0,.15 texture {txtChargeCarrier(0)}}
cylinder {0,<0,0,.499>,.15 hollow
texture {
gradient z
texture_map {
[0 txtChargeCarrier(0)]
[1 txtChargeCarrier(1)]
}
scale .5
}
}
no_shadow
no_reflection
}
#declare CurvedCharge=union { // Charge carrier with curved "motion blur tail"
sphere {<0,-1,0>,.15 texture {txtChargeCarrier(0)}}
difference {
torus {1,.15 rotate <0,0,90>}
plane {<0,0,1>,0}
plane {<0,0,-1>,0 rotate <-29.99,0,0>}
hollow
texture {
radial
texture_map {
[0 txtChargeCarrier(.3)]
[1 txtChargeCarrier(1)]
}
frequency 12
rotate <0,0,90>
}
}
no_shadow
no_reflection
}
// The scenario:
box {<-.16,-1,-2>,<.16,1,2> // The hall element
texture {txtHallElement}
no_shadow
}
merge { // Wiring with travelling charge carriers
// Wiring on the side towards the viewer:
cylinder {<0,0,-2>,<0,0,-3>,.06}
#object {Qtorus rotate <90,0,0> translate <0,-1,-3>}
cylinder {<0,-1,-4>,<0,-2,-4>,.06}
#object {Qtorus translate <0,-2,-3>}
cylinder {<0,-3,-3>,<0,-3,-1>,.06}
// Wiring on the side facing away from the viewer:
cylinder {<0,-3, 1>,<0,-3, 3>,.06}
#object {Qtorus rotate <-90,0,0> translate <0,-2,3>}
cylinder {<0,-1, 4>,<0,-2, 4>,.06}
#object {Qtorus rotate <180,0,0> translate <0,-1,3>}
cylinder {<0,0, 2>,<0,0, 3>,.06}
texture {WireTxt}
}
union { // Charge carriers:
// Charge carriers on the side towards the viewer:
#object {StraightCharge translate <0,-3,-2.7>}
#object {CurvedCharge rotate <30,0,0> translate <0,-2,-3>}
#object {CurvedCharge rotate <90,0,0> translate <0,-2,-3>}
#object {StraightCharge rotate <90,0,0> translate <0,-1,-4>}
#object {StraightCharge rotate <90,0,0> translate <0,-1,-4>}
#object {CurvedCharge rotate <150,0,0> translate <0,-1,-3>}
#object {StraightCharge rotate <180,0,0> translate <0,0,-2.5>}
// Charge carriers inside Hall element:
#if (HallUpwards)
#object {CurvedCharge rotate <195,0,0> translate <0,-.3,0>}
#object {CurvedCharge rotate <30,180,0> translate <0,1.15,-1.5>}
#object {CurvedCharge rotate <0,180,0> translate <0,1.15,1.5>}
#else
#object {CurvedCharge rotate <210,0,0> translate <0,-1,-1.5>}
#object {CurvedCharge rotate <15,180,0> translate <0,.3,0>}
#object {CurvedCharge rotate <180,0,0> translate <0,-1,1.5>}
#end
// Charge carriers on the side facing away from the viewer:
#object {StraightCharge rotate <180,0,0> translate <0,0,3>}
#object {CurvedCharge rotate <270,0,0> translate <0,-1,3>}
#object {StraightCharge rotate <270,0,0> translate <0,-2,4>}
#object {CurvedCharge rotate <330,0,0> translate <0,-2,3>}
#object {StraightCharge translate <0,-3,2.3>}
#if (PlusTowardsViewer)
scale <1,1,-1>
#end
}
#object {PowerSource // The battery symbolising the power source of the circuit
#if (PlusTowardsViewer) scale <1,1,-1> #end
scale 2
translate <0,-3,0>
}
#union { // Pair of magnets
// The magnet at the left-hand side of the image:
box {<-15,-1,-1>,<-3,1,1>
pigment {
object {
text {ttf MagnetFont
#if (NorthAtLeft) "N" #else "S" #end
,3,0
scale 2
translate <-4.3,-.7,-1.5>
}
#if (NorthAtLeft)
color rgb <1,0,0>
color rgb .85
#else
color rgb .85
color rgb <1,0,0>
#end
}
}
finish {ambient .4}
no_shadow
no_reflection
}
// The magnet at the right-hand side of the image:
box {<3,-1,-1>,<15,1,1>
pigment {
object {
text {ttf MagnetFont
#if (NorthAtLeft) "S" #else "N" #end
,3,0
scale 2
translate <3.2,-.7,-1.5>
}
#if (NorthAtLeft)
color rgb .85
color rgb <1,0,0>
#else
color rgb <1,0,0>
color rgb .85
#end
}
}
finish {ambient .4}
no_shadow
no_reflection
}
}
// 4 x 4 arrows to indicate the direction of the magnetic field:
#local Ktal=-.75;
#while (Ktal<1)
#local Rtal=-.75;
#while (Rtal<1)
#object {FieldArrow translate <0,Rtal,Ktal>}
#local Rtal=Rtal+.5;
#end
#local Ktal=Ktal+.5;
#end
// Point of view:
camera {
location <4,3,-5>
look_at <.8,-1.3,0>
}
// Illumination:
light_source {<20,10,-15> color rgb 1}
light_source {<-10,20,10> color rgb 1}
// Spotty surroundings outside viewfield to enhance reflective surfaces:
#declare Spotty=pigment {
marble
color_map {
[0 color rgb 0]
[1 color rgb .8]
}
scale .1
}
sky_sphere {
pigment {
gradient z
pigment_map {
[0.00 Spotty]
[0.88 Spotty]
[0.88 color rgb 1]
[1.00 color rgb 1]
}
translate -.5
scale 2
rotate <35,-32,0>
}
}
此文件中描述的项目
描绘内容
GNU自由文档许可证1.2或更高版本 简体中文(已转写)
知识共享署名-相同方式共享3.0未本地化版本 简体中文(已转写)
共享资源质量评价 简体中文(已转写)
维基共享资源特色图片 简体中文(已转写)
10 4 2005
image/png
文件历史
点击某个日期/时间查看对应时刻的文件。
日期/时间 | 缩略图 | 大小 | 用户 | 备注 | |
---|---|---|---|---|---|
当前 | 2005年4月10日 (日) 03:00 | 984 × 986(401 KB) | Peo~commonswiki | Shows the Hall effect for different directions of electric current and magnetic field. |
文件用途
以下6个页面使用本文件:
全域文件用途
以下其他wiki使用此文件:
- ar.wikipedia.org上的用途
- ast.wikipedia.org上的用途
- az.wikipedia.org上的用途
- be.wikipedia.org上的用途
- bg.wikipedia.org上的用途
- ca.wikipedia.org上的用途
- cs.wikipedia.org上的用途
- da.wikipedia.org上的用途
- de.wikipedia.org上的用途
- el.wikipedia.org上的用途
- en.wikipedia.org上的用途
- en.wikiversity.org上的用途
- es.wikipedia.org上的用途
- fa.wikipedia.org上的用途
- fi.wikipedia.org上的用途
- fr.wikipedia.org上的用途
- fr.wikisource.org上的用途
- fr.wikiversity.org上的用途
- he.wikipedia.org上的用途
- hr.wikipedia.org上的用途
- hu.wikipedia.org上的用途
- hy.wikipedia.org上的用途
查看此文件的更多全域用途。
元数据
此文件中包含有扩展的信息。这些信息可能是由数码相机或扫描仪在创建或数字化过程中所添加。
如果此文件的源文件已经被修改,一些信息在修改后的文件中将不能完全反映出来。
文件修改日期时间 | 2005年4月10日 (日) 02:59 |
---|